Serving Staten Island & NYC

Heating & boilers

Boiler repair & installation on Staten Island

No heat, a leaking boiler or a system near the end of its life. We repair, replace and install boilers for homes and buildings across Staten Island.

Boiler installed in a Staten Island basement with new piping and controls

Heat you can count on all winter

A boiler is the heart of most Staten Island heating systems, and when it fails, it fails at the worst time: a cold snap, a holiday weekend, a house full of family. Our crew has been keeping boilers running across the island for more than 35 years, in single-family homes, multi-family buildings and commercial boiler rooms.

We work on the systems you actually find here: hot-water heat with baseboard or radiators, older steam systems in pre-war houses, and modern high-efficiency units. Whatever is in your basement, we start by finding out exactly why it is not doing its job.

Repair first, replace when it makes sense

Plenty of boiler problems are repairable. A failed circulator pump, a faulty thermostat or aquastat, a clogged burner, a leaking relief valve or air trapped in the lines can all stop the heat, and none of them mean you need a new boiler. We fix what is broken and tell you plainly how much life the system has left.

When a boiler is cracked, badly corroded, or costing more in repairs and fuel than it is worth, replacement is the honest answer. We will walk you through the options, explain what changes and what stays, and size the new unit for your home or building rather than guessing.

Installations done to code, gas side included

A new boiler is more than a box in the basement. It needs correct piping, venting, controls and a safe gas connection. We are licensed, insured, and DOB and DOT gas certified, so the gas work is handled by the same crew that installs the boiler. No juggling contractors, no gaps in responsibility.

We also install boilers as part of remodels and new construction, and we pair heating work with water heater replacement when it makes sense to do both at once. For larger properties, see our commercial and industrial work.

No heat right now?

If your home has lost heat, call 718-452-3418. A no-heat call is treated as an emergency. We will get you a time, come out quickly and get the heat back on as fast as the fault allows.

Getting ready for winter

The best time to look at a boiler is before you need it. A pre-season check catches worn parts, low pressure, leaking valves and venting problems while the weather is still mild and scheduling is easy. If your system has been noisy, slow to heat or cycling on and off, mention it when you book so we can bring the right parts. It is also a good moment to make sure radiators are bled, thermostats are working and nothing is stored too close to the boiler. A few small fixes in the fall can be the difference between a quiet winter and a no-heat call in January.

When to call

Signs you need us

No heat or uneven heatCold rooms, radiators warm on one floor only, or no heat at all.
Banging, gurgling or whistlingNoise usually points to air, low water or a pump problem.
Water around the boilerLeaks from fittings, valves or the boiler itself need fast attention.
Keeps shutting offA pilot or burner that won't stay lit, or a boiler that keeps locking out.
Rising fuel billsAn inefficient or poorly tuned boiler burns more gas for the same heat.
An older systemBoilers in service for many years are worth a check before winter.

How we work

What happens when we arrive

  1. 1

    Diagnose

    We find the actual fault: controls, circulator, burner, venting, leaks or pressure.

  2. 2

    Explain

    You get a clear repair-or-replace recommendation before work starts.

  3. 3

    Repair or install

    The right parts for a repair, or a new boiler sized for your home or building.

  4. 4

    Test and tidy

    We fire it up, check operation and safety controls, and leave the boiler room clean.

Copper heating supply and return piping in a Staten Island basement

Why customers choose us

  • 35+ years of hands-on experience
  • Licensed and insured
  • DOB and DOT gas certified
  • Residential, commercial and industrial work
  • Quick response and reasonable prices
  • Many of our clients are repeat customers

Reviews

What customers say

Read our reviews on Google

See what neighbors across Staten Island say about our boiler and heating work, straight from our Google Business Profile.

Questions

Boiler Installation & Repair: common questions

Should I repair or replace my boiler?

If the boiler is structurally sound and the fault is a part like a pump, valve or control, repair is usually the right call. If it is cracked, heavily corroded or needs repeated major repairs, replacement is often cheaper over time. We'll give you an honest recommendation after we look at it.

Do you work on boilers in multi-family and commercial buildings?

Yes. We work on residential, commercial and industrial heating systems, from a single-family basement to a full boiler room.

Why does my boiler bang or gurgle?

Common causes are air trapped in the system, low water, sediment, or a failing circulator. It is worth having it checked, because some of these get worse and can damage the boiler.

Do you handle the gas connection for a new boiler?

Yes. We are DOB and DOT gas certified, so the same crew installs the boiler and makes the gas connection safely and to code.

We're a phone call away

Leak? No heat?
Call now.

Talk to a licensed plumber today, or send the form and we'll call you back.

Request service

Tell us what's going on and we'll call you back. For emergencies, call 718-452-3418 now.